TURK wrote:
Did the Mc16 ever have a dry cluch?
Yes, but only as part of the HRC Formula 3 kit. A production MC16 "SP" was never made/sold.
TURK wrote:
If not have people fitted a dry cluch to a Mc16 engine
Yes. It's not a direct fit, but the MC18 R6K and MC21/28 SE/SP transmissions/clutches can all be made to fit relatively easily. Forum members have done it, and I think there are some posts in the "Members Builds" area, but you will need to do some searching.
One member, 2smoke [who unfortunately sold up and moved on to bore strokes a few years ago] raced and MC16 that he'd converted to a dry clutch setup. Try searching for his user name.
TURK wrote:
Did all Mc16 bikes have Mc16E at the start of the engine number
All NSRs (except some HRC and/or replacement engines) will be stamped MC16E. That's the engine type designation.
TURK wrote:
Did any mc18 have Mc16 at the start of the engine number
All of them... see above.
_________________
Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
Check us out on Facebook! Please "like" our page!