Hey NSR junkies
Raising my MC18 r2j problems

I've jacked up the rear with the hrc plates, stiffened the front & the bike feels good.
I knew the chain would rub the front rubber/ swingarm and it did.
I only did 2 sessions as it was flogging out fairly quick.
I was going to make up some linkage plates a little less aggressive and probably drop the front a bit.
Massive problem is I can't hold as much corner speed and the belly pan scrapes!!

Any ideas on raising the r2j with out fouling the front of the swingarm. I want to get it up 35 to 40mm in the rear from stock.

I've had a look at putting a mc21 swingarm on but someone will probably have a cry because it's not period 6 (before 1990) for historic racing in Australia.

Any ideas?

thanks legends
Chris
_________________
NSR250R MC18 R2J
Australian Historic Racing 🤘🏻