As Fontyyy says, the simple answer is yes.

The more involved answer is yes, but don't expect to simply be able to swap between STD and HRC cards. The setup for each varies dramatically, especially if expansion chambers & pod filters etc., and an HRC jet kit are fitted.

Unlike the R5/6K and MC21, the MC28 wiresplice alone has absolutely no effect on performance, so is only done in conjunction with other modifications.

At best, an MC28 with a wire splice, set up for an HRC card/pipes/jet kit, and started with an STD card will run like crap, at worst it could be the end of your motor.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!