poosterwyk wrote:Hi Jim - not sure if you have seen this link on the website but it details how the oil pump should be set up http://tech.nsr-world.com/nsr250/all-nsr250/nsr250-oil-pump-setting.php
if you go to the "search" tab and type in oil pump - it will also get you previous queries

Yes, thanks, I had seen that and the others. I wasn't 100% sure I knew where the index mark on the pump body was so I wanted to verify via the group as much as possible that the pulley is going past where it should at both half and WFO throttle position - it seems like I need to back off the oil pump setting a bit. I'm hoping this will not affect that carb-slide settings given that the instructions for adjusting the pump are separate and there is no mention that adjusting the pump should alter the carb-throttle settings. Fingers crossed. - Many thanks.
-Jim
_________________
-Jim
'93 MC21