prelude2.2 wrote:okay so I can get the magteks powder coated here in Ireland but the only colours can be in RAL paint codes. Below is a link to all the RAL codes. I assume, if Honda used the RAL system, they used RAL 9005 for the black. However the repsol orange Tyga used could be any on of about 5 or 6 on that list. Ive emailed Tyga and asked them what orange RAL colour they used but no reply yet. Hopefully Honda and Tyga used the RAL system and it will be a perfect colour match.

https://www.ralcolorchart.com/

You're hoping! TYGA will be using the Thai system... good luck with that! Nothing against their paintwork, it's very good, and pretty accurate, but expecting the Thais to work to an international system is laughable at best. I may be wrong, but I'll bet a can of Coke and a Mars Bar on it! 🤣🤣

Try Reality Motorworks. They did all the NSR500 and RC30/45 magnesium wheels when I was at Performance Engineering, and I'm certain painted the wheels on the TSR to get the correct HRC gold colour match. If anyone can paint them, I expect they can.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!