Front Forks
The Front Forks were looking a bit tatty, so with Wheel and Calipers removed and some Scotch Pad and Wet & Dry to hand, the paint was rubbed down, cleaned and masked up ready for respraying.
Body Pro P965A etching Primer was used first off followed by several light coats of Pro Touch Grey Primer rubbing down between coats. The difficult part was finding a suitable shade of Silver top coat that wasn’t too bright or too dull.
After using different sprays including Hammerite Smooth Silver, Honda Silver etc.. we settled on Halfords M0-380 rattle can (couldn’t find what colour it was equivalent to though) and re-sprayed the Forks.
Front Axle Shaft
Last job, cleaning out thread on the Front Axle Shaft.
