. when you say the or/bu wire is spliced into the green is it furthur towards the seat than the pgm?
to do the wire splice as shown on this site you have to cut the or/bu wire then splice into the 12v feed, therefor the rest of the or/bu wire will continue down the loom where it attatches to the thick green wire which i beleive runs to earth (green-earth makes sense) as andys wire splice says the or/bl wire runs to earth in a standard loom.
i would suggest doing the wire splice as per nsr-world and try it, i had real problems to start with but only because someone had spliced an m max box in and not done it properly
. i found with the help of matt from tiga that the "splices" with proper brass cramps are factory fitted.
hope this was helpfull and not to confusing :lol:
what do ya recon dave..andy.
_________________
MC21SP - Roth-tax
CBR400 - track
MC21R - sold
MC21SP - sold