How Honda say to start your 2 stoke.

1. Turn fuel valve "ON"

2. Pull fuel enrichment knob up

3. Start engine

4. After the engine starts, run it for a few minutes, "blipping" the throttle untill it is warm enough to idle with fuel enrichment knob lowered. The knob should be lowered as soon as possible to prevent spark plug fouling.

5. Do not rev the engine more than necessary or engine damage may result.

6. Warm the engine for a few minutes until it is heated to operating temperature (untill engine responds to throttle smoothy) (water temperature at 60 deg)

7. Under no circumstances should the engine be driven at high speed (full throttle) under no load.
_________________
If I have to take the carbs off once more...