The tuning page says that 14mm of the fork should be showing for an MC21, but there's no information for the MC28. My MC28 has got rings which locate in a groove in the forks. This groove/ring is positioned between the triple clamps, and slides inside the clip-on mounts from underneath locking in place. This means that with the mounts butted up on the underside of the top tripleclamp, the forks protrude 3mm above the top of the triple clamp, and are fixed. They cannot slide up any further.

3mm seems a bit tall. Am I assembling this wrong? Are the MC28 not supposed to be adjusted? Is this 3mm the requisite setting?

I'm kind of in a bind, as I can't find this info anywhere.

J