More electrical woes, at least with mechanical failures you can see what has gone wrong!!. My mc16 has no sparks on either cyl. After the crank rebuild the front was only firing intermittantly but once all the terminals had been cleaned and re-fitted it was fine for 10miles before the front failed, closely followed by the rear. How common are pulse generator failures? I only ask because after printing off the wiring diagram from Jamie's site I see that the neutral switch also comes off this part of the loom and whilst testing for sparks the neutral light was flickering off as I kicked the bike over. The first circuit from the battery through the ignition and kill switch to the cdi units appears ok but I am just looking for any ideas before I tear all the electrics to peices.
_________________
it's a name, not a condition