I was looking at my wiring to the PGM3 unit and there seems to be some wire splices but it's not as described on the site.

From the Black connector
Orange/Blue wire is spliced with the Green/grey wire from the white connector.

From the white connector
yellow/grey is spliced with the Blue/grey wire from a grey connector a bit up the harness.

The bike runs, but seems to be hard to rev out in 3rd gear and up.

I looked at my spare harness and it has teh same wire splice on the yellow/grey to blue wire.

Can someone help explain why these splices were done?
I would like to derestrict the bike, but not sure what to do with these splices.