Sorted out the jetting had 140 went up to 150 bike runs clean all the way up with good plug color.

Other problem still remains though.

In order to start the bike i remove the lower cylinder plug and poor some fuel inside. Then the bike starts form first kick. If i switch off the bike it can start again after lets say 10-20 min.
Now if i try to start the bike the next day all the same again.
I've checked the tank breath ok, The carbs are clean ok, i have a strong spark, what is suspect is that the bike doesn't draw enough fuel at kick.
Is there any possibility would be a blocked air solenoids?
The compression feels good, even if i dint make a proper check. And when the bike starts it runs really strong,

I have an MC18 flywheel on the my MC21 does this have any relation due to less advance?

Demetris