Hi James, thanks for your comments. The levers are made by CRG. I had to fit the ZX10R master cylinder and clutch lever bracket to fit the levers. CRG only make levers for modern superbikes, (GRXR's, Blades, R1's etc). The Kawasaki bits bolt straight onto the RVF clipons. The threads for the banjo bolts differ between the master cylinder and the calipers. The levers were pretty expensive, but I saw them on a ZX10R racebike at the NEC and had to have them .
_________________
Warning:
This post may contain traces of peanut!