Welcome on board Andy!

Doesn't sound so good to me. Pop the plastic cover off the PGM-III and see if you can see any damage. It's usual for the RC Valve side of the PGM to die when it's shorted or the servo or valves are strained, but not so usual for the IGN side to die. (It can happen though.)

I'd personally be inclined to throw the other PGM-III on and try it, but I'm a bit reckless like that! Do the orange/blue wire splice and chuck that KISS box in the bin (or back at the person who sold it to you!) as it sounds like it could be faulty.

Ideally you want to try your suspect PGM-III on another fully functional bike first, so see if symptoms still exist, and then try your new one too.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!