You can fiddle the spacers around. I think mine has a '21 spacer in one side and an R2J spacer the other. (A little hard to remember now.)

The RS disc offset and bolt pattern are the same as the NSR, but the RS is a larger diameter of course, so you just bolt the RS discs up to the NSR wheels.

You will need a custom stem for the RS triple clamp, and a sleeve for the top clamp, as the NSR uses a slimmer, taller stem.

I have two RS front-ends. A 92 USD on my MC21 with Magteks, and a 91 RWU on my MC16 with Enkies. New stems were needed for both. Both front-ends can use the MC18/MC21 calipers, but they need modifying slightly. I have RS250 on both mine. The 95 has to use the RS calipers, or something with similar bolt pattern as it's different to the NSR. I think it's a Brembo fitting.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!