I have a copy of the wiring diagram. I have checked the connectors at the globe and connector behind the instrument panel (no reading for the neutral light). The sidestand light is OK, and I assume I should get a similar voltage reading for the neutral light. According to the wiring diagram, the wire should go all the way back to the PGM (no inline connections). So, working back down the line, I want to check the output on the PGM, then the input side, then the GPS neutral wire (ie following the light green/red wire). I just want to know the best way of testing the wires into the PGM block. At the instruments/globe you have the light green/red wire and the black/brown (+) wire to measure across, but at the PGM which is the equivalent wire (black/white, 5th from left on the diagram?). I just don't want to short the PGM and fry something.
I thought that someone may have had a similar experience and be able to point me to possible problem areas.
Thanks