I've just fitted a 300 kit on my NSR and am wondering how to set the oil injector up correctly. According to the diagram on this site there is an index mark on the pulley and an index mark on the body which should align at full throttle.

I'm a bit confused as the pulley has two index marks and an N on it and the oil injector body doesn't really seem to have a mark at all, unless it's the ridge that sticks out somewhat. Either way, aligning the pulley mark which is closest to the end of the pulley means that there is slack in the cable (this is the index pulley mark in the picture I believe), but aligning the one closest to the N seems to work better. Hope what I said makes sense and someone can help.

Btw, there isn't a translated version of the workshop manual available anywhere yet is there?
_________________
MC21 Honda NSR250. TYGA 300 conversion.