NSR250.net Forums Logo: Honda NSR 250 Forums, Classifieds and Service Manual in English. Covering All Honda NSR 250 MC16, MC18, MC21 and MC28 models
NSR250.net Forums

#
 
#
 
Performance Engineering

  • NSR250 Forums Index ‹
  • Members Content
  • Members Garage
  • Subscription
  • Transactions
  • FAQ
  • Search
  • Register
  • Log in

View Single Post


 Topic: 89 mc16e running issues 







Max szeged

 
    Send private message View user's profile MSN Messenger
    Reply with quote

Max szeged » Sun Jan 31, 2010 8:53 am

if the ignition is good then its the fuel. Carburator off!
1st seat and gas tank off.
2nd Battery and airbox off. (you will need a long shaft screw driver for the airbox because its in a tight place to get to)
3rd unplug all the cables and pipes to the carburator (becarefull of the oil pipe it may split if you use too much force.) i find it easier to loose it on the pump end.(remember which pipe goes to which pin on the pump.)
4th release the carb screws at the junction to the manifold.
And you are done. you can leave the gass tube in place. and remember to drain the bows before you start removing the caarburator so that gas dont go everywhere down you clothes.
_________________
feel the wind
Back to top

  • NSR250 Forums Index
  • All times are GMT
Powered by phpBB © 2001, 2005 phpBB Group


Hosted by NSR250dotNET © 2008 NSR250dotNET