Hi all,

New to this site and just bought a mc18 so it felt appropriate to join a nsr forum.

I'm in the middle of trying to sort out the rc servo motor and have since bought a second one from ebay. The first servo didnt do anything although there is more resistance when trying to turn the servo with the ignition on.
Just fitted the second one and when I turn the ignition on the servo moves to the "lo" position, but when I start it and rev it the servo is trying to turn passed the stop in a anti-clockwise direction which is oppsite to to the "hi" position.
Not wanting to damage this servo i removed the servo roller which the cables wrap onto so there is just the shaft popping out the servo box, when I rev it now the servo continually spins anti-clockwise which is the wrong way!

Would it be possible that the cdi is faulty?

Where the cdi is on my seat unit there is another unit on the opposite side, any ideas as to what it is?? I tried deristricting the bike by disconecting the single black wire next to the red plug but the servo didnt work at all?

Getting quite frustrated now and any help will be much appreciated!

thanks nelly.

Mod edit: TXT speak etc.
FY