NSR250.net Forums Logo: Honda NSR 250 Forums, Classifieds and Service Manual in English. Covering All Honda NSR 250 MC16, MC18, MC21 and MC28 models
NSR250.net Forums

#
 
#
 
Performance Engineering

  • NSR250 Forums Index ‹
  • Members Content
  • Members Garage
  • Subscription
  • Transactions
  • FAQ
  • Search
  • Register
  • Log in

View Single Post


 Topic: MC21 - Chasing problem 







80XAR

 
    Send private message View user's profile MSN Messenger
    Reply with quote

MC21 - Chasing problem

80XAR » Tue Sep 28, 2010 10:30 pm

Hi guys
Ive been try to track what i though was a missfire for a while now. Everytime i try something, the bike does something new. Its great Evil or Very Mad
After checking alot of other things, the bike is now doing this :-
Starts fine. Idles fine.
On light throttle (0-25 percent, idle to about 6k) it sounds almost fouled. Simular sound to when they run out of fuel. It wont accelerate, but doesn't die completely either.
Open throttle above that (25-100 percent, idle to 10k) and its a jet. Pulls real well through the mid range towards the top end.
Catch is, it breaks down at 9500-10000rpm. I call it 4-stroking, but basically, it wont pull past 10k and sounds very course.

Once warmed up, it idles fine. Starts first kick no problem. Bliping the throttle is fine up to 6-7k. Didn't try bliping any higher as it was getting late, and raining.

Mods - Std engine. Orange wire splice, GPS splice, Tyga end cans, drilled airbox. Carb jetting - standard.

Any advise on what to check next ? Ive check coils, cleaned ignition pick ups, multiple spark plugs. Pulled the carbs and inspected them. Previously it had the front cylinder cutting in and out, but that seems to have fixed it self. Im starting to think possible crank seals.
_________________
Winning isn't everything, but loosing isn't anything
Back to top

  • NSR250 Forums Index
  • All times are GMT
Powered by phpBB © 2001, 2005 phpBB Group


Hosted by NSR250dotNET © 2008 NSR250dotNET