{.bLanK}GoD wrote:Shot!
Yip CRC FTW!
Use a little anti seize when reinstalling the new stud.
Thread two nuts onto the stud, lock them together to screw it into the cylinder barrel.
Exhaust studs always require brass nuts. Put a bit of anti seize on there too but that's what the brass is for.

Will proceed as recommended.

Anti seize = grease?

Wrt the brass nut, I ordered the original pn from the local Honda dealer.

PS. I also looked for the significance of yay, yip & FTW. This forum is also teaching me real english!
_________________