We started on it in my mates kitchen, but he got kicked out of that place (not sure if it was anything to do with firing up his Bandit in the living room?!), and it's all been stored in my Dad's loft ever since!
It's the little things like the cold air feed tubes that come off the holes where the idicators once were and feed down the side of the frame into the airbox, and the HRC clutch/transmission assembly right off the RS that just make it so trick! HRC even made little scoops to fit in place of the front indicators to duct the air!
The HRC frame doesn't look as obvious as the MC18 HRC frames, but you can see the subtle bracing if you know where to look. The swingarm's a little more obvious, and the fuel tank's quite trick with only the little RS style screw on cap and one-way valve!
_________________
Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
Check us out on Facebook! Please "like" our page!