Ok, not what I had hoped for...

The servo moved intially; with the TPS unplugged and ign on it swept to down (towards LO). I then started the bike and gave it a little bit of throttle and the display immediately flashed ERR2, I turned IGN off instantly half expecting a problem and not wanting to burn the PGM out.

When I turned the bike on again the ERR2 was gone (not like on my previous PGM where it stayed on constantly when the servo was hooked up to the loom) but when I kick start the bike and rev again ERR2 comes back.

Has anyone got any idea what could be the problem? I'm trawling the site now for similiar issues.

Cheers