Make sure everything is tip top, and the RC Valves adjusted correctly.
Best results have been found to be 4x 20mm holes in the front slope of the airbox lid and the wiresplice. Standard pipes are good for well into the mid 60's, but heavy. You can always tape off 2 holes with duct tape if necessary to richen it back up a tad on a cold night.
Always check the jetting after any mod... Don't post/discuss jet sizes on the public forum though please, or the thread gets locked.
_________________
Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
Check us out on Facebook! Please "like" our page!