Sounds like a "right proper bodge job" to me.
- The calipers should NEVER be misaligned. In my opinion, the brakes are the single, most important part of the bike. Riding it like that would be insane. You wouldn't catch me trying to haul up from 130mph with 2/3rds of the pads!
- Can't say; not enough info, but the disks should sit centrally in the calipers.
- Provided the triples used are the ZXR triples, then I would say the original ZXR axle should be used, and bearings fitted to the wheel to suit its diameter. Custom spacers are almost certainly required too. Depending on both the discs and the wheels used, shims may be required behind the discs, or the wheel turning down to move the discs in more.
Not enough info to make anything other than generalisations.
_________________
Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
Check us out on Facebook! Please "like" our page!