This is the loom cut down (modified sections are circled):
I cut away all the wrapping, and followed all the empty plugs to their sources, then cut away the wires.
Plugged everything in;
RC servo
TPS
Solenoids
Pick ups
Tacho
Coils
Temp sender...
PLugged in battery and nothing. Read up on the forums, crank the RC servo to 'high', switch the bike on and nothing.
Attach a spark plug to the coils and turn the engine over and 'nothing'. Lots and lots of nothing.
In sheer desperation after scratching my head, reading and rereading the wiring diagram, testing and retesting wires I tried the spare completely unmolested loom.
Wired up the side stand switch
Wired up the ignition
Attached the kill switch and everything else above and
More facking nothing. Swapped out all the spare components (solenoids, RC servo) and still nothing.
So I am either missing something having converted the bike to total loss, or my PGM3 is fscked. Someone please tell me I am missing something.
I've lost all motiviation. Fscking arsehole thing.