kalnz44 wrote:No mods aside from the wire splice which was done today. Had the problem for about a month.
Gave the servo and pulleys a good de-grease, lots of gunk.
When i adjusted the RCs it took quite a bit to line them up. Any sign that the servo is on the way out? Apart from the obvious: no go.

Actually my servo would sound like it was moving when I inserted the key, but upon actually looking at it with the tank propped and engine running, me thinks it wasn't moving all the way. In fact, when I took off the cable pulley, it had some spots that felt like the gears inside wear stripped. Sure enough, I gently twisted the newer servo and there weren't any "free play" spots.

(I had also double checked to see that the RC valves were able to turn freely back and forth, and they were.)

Dana
_________________
2016 Husqvarna 701SM
2021 Husqvarna FS450 supermoto
2014 Honda CRF250R supermoto
1995 NSR250r MC28