Lesviffer750 wrote:
Either that, or your floats sticking and flooding, if your screws are tight, check theres no crap in the float needle.
No, that's not an overflow outlet, it's a drain outlet. Leaking from there means the screws aren't seated correctly. There's a small rubber O-ring that can fail too, but that will usually "weep", rather than leak.
If the floats are sticking then fuel will come out of the overflow pipes above the float chambers (on the left of the top casting).
_________________
Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
Check us out on Facebook! Please "like" our page!