I went for a mountain ride the other day. Bike was running fine, stopped at the top for a rest and went I went to start it, wouldn't budge.

I checked all the usual things. Pulled the plugs, saw they were black and wet, so I replaced them. But when I checked for spark by grounding them to the frame, I got nothing. The oil light was turning on, but the battery was almost dead.

So I took the battery out, charged it, and still no spark when I put it back. And now, the oil bulb is not coming on.

I have:
-checked the kill switch for continuity (good)
-went over all the electrical connections (good)
-checked battery voltage (12.55v)
-checked ignition coil resistance
Top Cylinder: Primary 1 ohms, Secondary 3,280 ohms
Bottom Cylinder: Primary .8 ohms, Secondary 4,330 ohms

I suspected it was my ignition coil connectors as they were flimsy, or the kill switch that was dirty. But cleaned both and still nothing, and the oil light won't turn on. Any ideas? Electrical issues are new to me so maybe I'm missing something...

Thanks