I am lead to believe that the procedure is to run it at 12,000rpm in top gear for at least ten seconds, then pull the clutch and kill switch, then coast to a standstill. I do not believe this for two reasons:
Reason 1:
The recent post on "what's the top speed you've been" shows that the majority of people haven't ever been anywhere near 12,000 RPM in top gear, let alone held it for 10 seconds. I myself would be doing in excess of 210kph at that point with my gearing; admittedly I am geared for the circuit, but anybody who is geared for the circuit should perhaps hit 12,000 rpm in top gear, but certainly not be holding it for 10 seconds. On the street ... you have to question the wisdom of carrying out that procedure on all but the most deserted of motorways.
Reason 2:
WHy do you do a plug chop? To check your main jets are not going to seize the engine. What is the best way to seize an engine due to wrong main jets? Run it at 12,000 rpm in top gear for as long as you can ...
I realise that there are exceptions to all this, and that people have posted saying that you don't HAVE to do it in top gear. However I am still left with the overriding feeling that the plug-chop as described by most people must be largely a myth.
I personally have managed to jet by 'feel' at max throttle in middle gears, plus some dyno runs, plus checking the plugs after sessions at the track. I have repeatedly tried and failed to succesfully carry out a plug chop!! It is just not realistic.
WHo here has actually done the max throttle max revs top gear ten seconds plus plug chop? How many times have you done it, and do you recommend it?
_________________
MC28 SE -sold-
MC21 with RS250 engine -for sale-
MC21 race bike -soon for sale-
