Dannyvirk wrote:Heya
I think i have the same MC-18 set up as you the MC-18 mark 1, it just has 2 black boxes and a pgm1 box,
I have no idea why you need a total of 3 black boxes, i think by the PGM-3 (never seen a pgm-2 yet) they had it down to one box.
You may need the MC-18 carbs as i've been told the MC-16 doesn't have a throttle position sensor,
and there's a plug on the MC-18 loom for one, Not sure if the carbs with be a straight swap or not?
Let me know if you try. alway curious to see what's compatible.
I think the MC-18 and the MC-21 have a different valve solenoid set up, i think the MC-18 has one, the MC-21 has 2,
someone correct me if i'm wrong.
Not sure if the switch gear or flywheel/ignition pick ups are compatible either?
cheers
Robert
thanks for the answer, yes, I confused because this pic shows 3 black box + pgm unit:
I have mc 21 carbs
, mc 16 carbs have 28 mm venturi diametrer, mc18/21/28 is 32 mm, also I got insulater for that diametrer.
yes, I will use mc18 valve selenoid, because mc21 has two valve selenoid and isn't the same conector(2 vs 3 pins)
I have understood flywheel and pick up sensor are compatible, if are a r5k or later, probably I will have some problem
now I need to know how is the conector, if anyone can take some pics, and upload it, I really apreciated
thanks a lot!
Bruno