While i was on a mission fixing my ignition problem, thought i'd pull the carbs down and give them a clean. Was not expecting this


Also had the chambers acid bathed and clear coated them with VHT high temp clear. I think they look horn in mild steel finish

So finally after cleaning the carbies, new coils and a general overhaul (2t pump leaking seal fixed, all cables cleaned and lubed, p/v tested and realigned and a heap of other cleaning) it runs again. Riding to the servo with 8psi in both tyres was a tad tricky. First ride in 2 years !!
Trainspotters will notice I've shortened the tyga mufflers a decent amount, and have made the std honda flange fit them. There is also so hand made brake lines from Andy there too

_________________
Winning isn't everything, but loosing isn't anything