Good Day all;

Shopping for a NSR, and have my eye on a MC-21.

Years back when my better-half and I first met, I was stationed (USAF) in Greece, and riding around on a 1989 TZR-250 3MA (traded my RG400 Gamma for it). She actually enjoyed riding on the back of the TZR, and years later when I purchased a '91 ZX-7"R" (the Ltd Edition model with aluminum tank, flat slide carbs, and factory fiberglass solo seat), I got an earful because she could no longer ride along.

The MC-21 I'm looking at does not have the passenger pillion pad, nor the pegs/brackets. It seems it is actually easier to find the pillion pegs/brackets than it is the pillion pad itself.

I did locate a pillion pad, but it is from a MC-28.

I used the on-line parts manual, and the part numbers are not the same between the pad for the MC-21 (77300-KV3-830) and the MC-28 (77300-KV3-950). Is this simply a case of Honda assigning a new part number to the same part just because it is associated with a new model, or are the two pads indeed different, and a pad for a MC-28 will not fit on the tail section of a MC-21?

Thanks in advance,
Dave