Thanks for reply

Here are the measurements

1. Top coil:
LT - 3,2 Ω
HT - 7,75 kΩ

2. Bottom coil:
LT - 3,1 Ω
HT 7,58 kΩ

Kill Switch:
When i test it with my multimeter i put one proble ( the black ) to the frame on the bike and other probe ( the red ) on Black/White cable from kill switch. When its set on RUN reads 24,5Ω but when its OFF there is nothing 0.

I forget to tell my Oil light is not coming up.

For the PGM III i was wrong sorry for that i see on the diagram that is all there no missing wires sorry again.