I am afraid this impeller assembly is still giving me a bit of trouble...
Now the impeller, shaft and bearing are free from the RH case, i am struggling to remove the seal.
The parts diagram refers to the 'Mechanical Water Pump Seal - 19217-KV3-831' but i cannot seem to remove it from the case.
Again, i am trying not to damage the part left in the case moulding as it does not look too worn, so not whacking it too hard - yet!
However, I assume from the parts diagram that the 'Water Pump Seal - 19217-KV3-831' come as one complete part, and the current used part will go in the bin? If so, it doesn't matter if i give it some welly?
Pics below for reference.
Any advice please guys, as i am really nee to get these parts off for blasting so i can start getting things back together?
Thanks as always.
M
The remainder of the seal assembly that is left in the case (the shinier bit):
[img]
[/img]
The part removed from the seal:
[img]
[/img]
Where it sits in the shaft assembly:
[img]
[/img]