Hi there,
I am new to the NSR250 (MC21) with about 300 miles under my belt. This is my first 2 stroke and I was just wondering if the throttle's are typically heavy for some reason and if it is required to run both throttle cables to work with the PGMIII?
Two cables aren't technically a requirement, but there really shouldn't be any reason to remove one. As Zeus says, replace them, or clean & lubricate them and check the routing. The throttle shouldn't be particularly heavy normally. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
Nope, we're still here, much to the chagrin of some, but we're "the originals" and starting to thin out a bit now! I've been around NSR's since the early 90s, and running NSR-WORLD.COM since late 2000 (nsr250.com from '95-'99), and a number of the members that float in and out from time-to-time have been around as long as me. Even the relative newbies here have dived in big-time, with full restorations largely completed, so there's usually someone not far away with either an answer to most questions, or who can point you to a topic that's already covered the situation.
Please feel free to browse through the Members' Garage and add your bike, and post a topic about it if you wish.
I am currently re-writing/modernising the site, but please check though the Workshop and Technical pages, and you can find our English Parts List here. Please be aware that there are some inaccuracies in the English Parts List, so be sure to cross-reference part numbers with the relevant Japanese manuals here.
Finally, please check the Members' Content for our Honda Approved English Service Manuals.*
Please note *ALL* English translations of any NSR250R Service Manual or NSR250R Parts List originate from NSR-WORLD.COM, and we are the only Honda approved resource for these manuals. Bootlegged manuals you may find other than those on this website are incomplete. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
My cable were getting a bit rough so I replaced them about a year ago. I wasn't able to find new Honda cables, but did see that T2 Racing makes them. Quality is excellent, you can even get them in different colors.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum