MC18 to MC21 swingarm conversion?

**Mon Jan 16, 2006 1:54 am » Post: #1 » Download Post**

I am curious if the rear swingarm, suspension and wheel from a later model 21/28 NSR250 is a direct swap for mc18? What about body parts?

**Mon Jan 16, 2006 2:18 pm » Post: #2 » Download Post**

anyone here ever do this?

**Mon Jan 16, 2006 2:29 pm » Post: #3 » Download Post**

Do a search Ken and you'll see what's been done before...
_________________
MC21SP Plaything
BMW F800GS Bumblebee
Triumph 9551 Daytona Big boys toy
FJ1100 Sporting relic
GTS1000 oddball

**Tue Jan 17, 2006 2:18 am » Post: #4 » Download Post**

I just searched the site for 30 minutes and didn't find any posts that would answer my question. I search for "swingarm conversion" "swingarm swap" "swingarm mc18"
Any other suggestions?

**Tue Jan 17, 2006 3:12 am » Post: #5 » Download Post**

The recent post covering this issue that I think you are thinking of Dave was removed to the internal Admin forum.

I will edit it and put it back up, but the topic will be locked.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Jan 17, 2006 5:08 am » Post: #6 » Download Post**

Thanks Andy! Very Happy

**Tue Jan 17, 2006 5:27 am » Post: #7 » Download Post**

Topic edited and reposted, and unlocked for further comment.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Jan 17, 2006 6:37 pm » Post: #8 » Download Post**

the other reason you might not have been able to find any info about it is the talk has been about a gullarm on to a 16 not a 18 ,Now that Andy has put the post back on you should find all the info you need.