powdercoating frame

**Wed Aug 30, 2006 7:49 pm » Post: #1 » Download Post**

Hi, im powdercoating my mc21 frame and swingarm satin black soon, but i was wondering whats the best way to remove the exhaust mount rubbers on the frame?

Confused

cheers

Jon

**Wed Aug 30, 2006 7:52 pm » Post: #2 » Download Post**

You can turn up too little collars and press them out using a little bit of studded bar.

Or

You can burn out the rubber part and then cut a slot in the outter steel ring and it will fall out.

Option 1 is much nicer.
_________________
If I have to take the carbs off once more...

**Wed Aug 30, 2006 9:52 pm » Post: #3 » Download Post**

Or you can NOT powder coat the frame!! Aaaaaaaaaaaarrrrrrrrrrrgh!! Laughing

Black frames are for TZR's!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Thu Aug 31, 2006 4:56 pm » Post: #4 » Download Post**

I want to be a bit different Wink

If i burn it out, where do i buy a new pair from? and how do u re-fit them?

Jon

**Thu Aug 31, 2006 5:42 pm » Post: #5 » Download Post**

if i were you i wolud just leave them in. to powder coat something it only needs to get to 250c and that rubber will take a lot more than that to damage it

**Thu Aug 31, 2006 5:43 pm » Post: #6 » Download Post**

really? ah thats good news then, i could always get them to mask it off also. 250 degrees aint that much really is it.

**Thu Aug 31, 2006 5:44 pm » Post: #7 » Download Post**

just get them to mask it off mate

**Thu Aug 31, 2006 5:53 pm » Post: #8 » Download Post**

great, thats one less thing to worry about. its costing £90 in satin black including all prep work, like masking and blanking off threads etc...

is that a good price?

www.aerocoat.net

will also do swingarm and shock spring.

**Thu Aug 31, 2006 6:03 pm » Post: #9 » Download Post**

not a bad price at all mate