PGM4 attachment

**Sat Nov 25, 2006 8:10 am » Post: #1 » Download Post**

Hi All,

Has anyone managed to attachs something onto the ignition card so u can hook it onnto a keyring or something like that? I am one of them types that always leave my car keys around and forgets where it is. I only have 1 card for my mc28. I am thinking of drilling my car in the corner under the key but im scared it might break the card. any suggestions?
_________________
Stock and really slow MC28SE Repsol Rep... =(

**Sat Nov 25, 2006 10:01 am » Post: #2 » Download Post**

If its normal creditcard size, you can get a thin plastic cover to push it into, to protect it. Then you could drill that or maybe there is already a chain attached

LONG URL POUL!!!
_________________
Poul
"If Life Gets Boring, Risk It!"
MC21SE, KISS box
MC21SP, HRC box, racing loom

**Sat Nov 25, 2006 10:25 am » Post: #3 » Download Post**

theres no holes or anything that i can attach a chain to im scared i will loose it
_________________
Stock and really slow MC28SE Repsol Rep... =(

**Sat Nov 25, 2006 11:11 am » Post: #4 » Download Post**

PhiLLaY wrote:
I am one of them types that always leave my car keys around and forgets where it is.

Hmmm... must be an MC28 owner thing... eh Racer38?! Wink

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sat Nov 25, 2006 2:50 pm » Post: #5 » Download Post**

But to be fair, at that moment Tom would be forgiven for having other things on his mind Wink

_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Sat Nov 25, 2006 2:53 pm » Post: #6 » Download Post**

and on his lap Laughing

_________________
Harley Davidson is the worlds most efficient way to turn petrol into noise without the harmful side effect of horsepower.

**Sun Nov 26, 2006 8:39 am » Post: #7 » Download Post**

lol does anyone have a pic that could show me where to drill on my card. Cheers,

Phil
_________________
Stock and really slow MC28SE Repsol Rep... =(

**Sun Nov 26, 2006 5:41 pm » Post: #8 » Download Post**

If you're a good shot, then you could probably drill it in the corner, right through the PCB, but I'd go for the end up at the fuel cap key!

Of course, I'm not going to guarantee anything! Wink

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Sun Nov 26, 2006 10:12 pm » Post: #9 » Download Post**

Andy wrote:you could probably drill it in the corner, right through the PCB

Shesh, you do have a problem with PGMIV's, don't you?
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Sun Nov 26, 2006 10:35 pm » Post: #10 » Download Post**

The card can be drilled, but can't remember which corner. I'll go check my cards and see what's what. Might take a few days, but will get back to you.

**Sun Nov 26, 2006 10:49 pm » Post: #11 » Download Post**

Jesus Tom, how did you find out?

No wonder you've got more spares than Honda Japan.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

**Sun Nov 26, 2006 10:54 pm » Post: #12 » Download Post**

Luck??

**Sun Nov 26, 2006 11:06 pm » Post: #13 » Download Post**

I'm sure it wouldn't make any difference to the performance of a '28 even if you did drill though the PCB Very Happy

_________________
If I have to take the carbs off once more...

**Sun Nov 26, 2006 11:18 pm » Post: #14 » Download Post**

fontyyy wrote:
Andy wrote:you could probably drill it in the corner, right through the PCB

Shesh, you do have a problem with PGMIV's, don't you?

I think someone's subconsciously seen the light! Very Happy

I think you are reading too much into my post Fontyyy!!

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Mon Nov 27, 2006 7:51 am » Post: #15 » Download Post**

cool! thanks heaps, just to be safe i think i will drill through the key part and attach a clip off thing so when i have it in the bike i can detach it from my keyring
_________________
Stock and really slow MC28SE Repsol Rep... =(

PGM4 attachment

PGM4 attachment

Re: PGM4 attachment