Can anyone please help me with the re-programming of a HRC p-010 card to my PGM?

Moriwaki Man!
I have heard you can organise the re-programming of these cards to PGM's can you please let me know if you can help me out with this? or if you know anyone who can?

Thanks

Having spoken to Drew (Morowaki man) in the past, what the guy does is program the PGMIV to the card, not the card to the PGM.

So if you aready have standard cards for your PGM, then buying this HRC 010 card and changing the PGM to suit, will make your standard cards redundant.

Hope that helps.

That helps heaps! thanks very much i appreciate it.

Does anyone have Drew's (Morowaki man) email to get in contact with him about re-programming the PGM units to HRC cards?

Thanks

racer38 wrote:Having spoken to Drew (Morowaki man) in the past, what the guy does is program the PGMIV to the card, not the card to the PGM

That's scary, so you've got to buy a PGMIV with no card (not tough on yahoo jap), an 010 card with no PGM (same again), pay someone to reprogram the PGM, then find out the RC valve side of the PGM is fried.


Erm, clearly a PGMII is the way forward.
_________________
Please do not PM me technical questions, if you can't find it on the Forum start a thread

I agree fontyyy.

Isn't that honda's racing motto, a step back to catch up? Shades of 86 NSR500 V4, when Spencer went back to the NS500 V3, or when (was it?) Doohan went back a year in model, 'cos the new one was radical to the point of not being as fast...

PGMII is a lot simpler to work around than PGMIV. Everyone should have one. Or F3 or RS electrics...
_________________
The Chopster

Guys,

I've got an 010 card which is obviously coded to another PGM, and i've been informed that i can have my PGM recoded to match the card.

This is what i've been told and apparently Morowaki Man is the man for the job or knows someone who does it so im trying to get in contatc with him to see if this is possible.

What do you mean (not tough on Yahoo Jap)? Are there a few cardless PGM's for sale on there?

PM him.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Thanks andy,

Just found him and sent him a message.