I got Question

I just bought MC21, one of the very few that came in to Mexico, any way, it is missing the PGMIII, I looked it up on the parts manual and I am confused...
The parts manual shows one PGMIII unit, and on the parts number lists, there are two PGM units showing, these are the number it shows;

30400-KV3-830
30400-KV3-831

My motorcycle frame number is... MC21-1011318

Any help is welcomed.

Any standard PGM-III from 1990 to 1993 will work equally as well as the next.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Thank you Andy

Sorry to hijack the thread,

I recently purchased an MC21 PGM III card and loom, but am confused as to the way to swap it over. My MC28 (track bike only) needs a PGM Card but the guy that sold me the loom says the 21 loom doesn't require a card??

Am i missing something, will I just use the original card, (stock card therefore not getting the benifits of using the unrestricted pgm III Loom) and if not (i'm assuming the card won't be compatable with the new loom) how will the ignition be energised (the card is the 'key' for the bike).

Regards Mick
_________________
MC28 Track Bike
01' Honda VTR 250 (previously owned)
05' Suzuki Gsx-R 600 (road bike)

Mick.

The PGMIII wont work with the MC28 loom, and the MC21 loom wont work with the PGMIV/Card.

You can swap out the PGMIV/Card/Loom with the PGMIII/Loom, but you would also need to use the MC21 ignition components to match (AC Generator/Pulse Generator/Etc..).