Hello!! I got a 88' nsr r2j and the rc valve not works normally, y tryed with a mc16 servo motor and works, but when the motor is up 7000 rpm the valve is turn to close slowly. Why this happen?
I see some diferences between the order of wires and both got the same colors but diferent orders, how can i fix it, anyone can help me? please scuse my inglish im from chile
If I remember correctly, the MC16 servo operates in the opposite direction to the later models. Most likely, but you will need to experiment, you should be able to swap the signal wires from the controller.
The best answer however, would be to source a working 1988 servo motor, as it sounds like the rest of the system is functioning normally. When you start mixing parts from other models, troubleshooting can become an issue later on. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
