HRC bellmouths. Anybody tried?

**Tue Jul 19, 2011 1:54 pm » Post: #1 » Download Post**

Found sokebody supplying HRC bellmouths to fit the TA carbs. Has anybody tried them?
_________________
MC21 Honda NSR250. TYGA 300 conversion.

**Tue Jul 19, 2011 2:44 pm » Post: #2 » Download Post**

Hi,

from what i know HRC didn't supply any bellmouths for the MC21 90-93 HRC Kit... Although i don't remember if did for the 1990 RK MC21... I will have to check my books but if i recall well it didn't either...

Cheers
Michael

**Tue Jul 19, 2011 3:29 pm » Post: #3 » Download Post**

er yes they did and i have a set on my kitted carbs Very Happy

but as the bike isnt running yet i cant tell you the gains on mine Rolling Eyes

but they do work,i can say that Cool

_________________
ive seen more tarts than mr kipling

**Tue Jul 19, 2011 3:48 pm » Post: #4 » Download Post**

That is something i didn't know... Do you have the Honda part number of the bellmouths Sil...?

**Tue Jul 19, 2011 3:51 pm » Post: #5 » Download Post**

Try Dan the man from gecko racing

**Tue Jul 19, 2011 4:24 pm » Post: #6 » Download Post**

neal beat me to it Very Happy

dan has had some made up mate,i can vouch for the quality and dans always good to deal with
_________________
ive seen more tarts than mr kipling

**Tue Jul 19, 2011 5:52 pm » Post: #7 » Download Post**

+ 1 for Dan

**Wed Jul 20, 2011 9:06 am » Post: #8 » Download Post**

They were not fitted to the NSR 250 RK until 93.....that said I couldnt resist a pair either.

**Wed Jul 20, 2011 9:30 am » Post: #9 » Download Post**

So i guess i was right... HRC never supply bellmouths for NSR's as a spare part...

**Wed Jul 20, 2011 10:12 am » Post: #10 » Download Post**

Hi anonymous.shyster is dan from gecko the supplier you found or someone else how much are they ?

**Wed Jul 20, 2011 10:45 am » Post: #11 » Download Post**

Code: < >

Yep, found them on geckoracing. Some cool stuff there. Now that you know, please guys, save me a set. And keep your eyes off my ramair, k? Thnx.

I wonder what filter I'd run with the bellmouths that butt up to eachother? Certainly not the sock type that I was initially going to go with. Maybe a rectangular foam cage type setup?

**Wed Jul 20, 2011 11:00 am » Post: #12 » Download Post**

you wouldnt run filters with them mate,or i'm not doing anyway and dans ram air boxes were made using a mould of the harc pro box ive had kicking around for donkeys years,it was pretty funny as dan had the scoop and i had the box.we only found out in one of our random conversations Laughing

so i lent him my box to use as a mould Very Happy

_________________
ive seen more tarts than mr kipling

**Wed Jul 20, 2011 11:07 am » Post: #13 » Download Post**

No filters? Sad

but dirt could get in!

The scoop looks as if it'd foul with the air solenoids...if you're running them.

**Wed Jul 20, 2011 12:53 pm » Post: #14 » Download Post**

Ahh, so according to Dan the solenoids go in the box.

So I know this stuff is designed to run without a filter but for safety sake isn't a thin bit of foam lightly oiled going to work without negating the advantages of ram/open air? I'd feel better about it knowing sand and larger debris wasn't getting in.

**Wed Jul 20, 2011 1:48 pm » Post: #15 » Download Post**

it never did my old honda rs any harm mate Very Happy

_________________
ive seen more tarts than mr kipling