if anyone out there has a dry clutch botttom end for a mc 21 they want to sell i would be very interested, it does not matter if this needs a rebuild, or barrels i have a standard R engine i can make one good one from the two, also im in no rush im just thinking ahead just let me know, thanks in advance
_________________
if dont fall off every now and then your not trying hard enough

still wanted

My experience has been that there are typically two levels of quality. The lowest quality is press moulded, these are of generally very poor fit, and the plastic is very low quality. The second is injection moulded and are typically a better reproduction of the original, and the plastic is generally better.

Paint quality is fairly random on either process.

I use a local reseller, who has an intermediate quality step (also adds a little to the cost), so end results are generally better.

They are what they are, and for MC18 owners they are fast becoming the only other option apart from race glass.

i guess that was onother post i dont think a injection moulded bottom end would last that long

LOL, thats right ! Will have a look for you chucky, maybe I will have enough parts to make up a conversion kit for you....

Cheers
Mario

thanks mario no rush at all, the bike wont et rebuilt for at least 4/5 months