WTB: HRC air tray

**Tue Nov 29, 2011 11:47 am » Post: #1 » Download Post**

Where can I get one of these (see attached)?

**Tue Nov 29, 2011 12:01 pm » Post: #2 » Download Post**

I'm guessing you meant for the NSR250... not an RS125? (Hence why I've moved this post.)

Well, we're hoping to have carbon replica ones again soon, but your best bet for the genuine HRC item would be Moriwaki-man and Yahoo! Auctions in Japan. They come up quite regularly.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Tue Nov 29, 2011 12:08 pm » Post: #3 » Download Post**

did you get in touch with rich about them andy?i was talking to him the other day but i had forgotten all about it Rolling Eyes

_________________
ive seen more tarts than mr kipling

**Wed Nov 30, 2011 4:35 am » Post: #4 » Download Post**

I'll keep an eye on yahoo. cheers.

yeah i did mean for the nSr. that'll be my fat fingers on a small phone.

**Wed Nov 30, 2011 11:12 am » Post: #5 » Download Post**

Is there any difference between MC18 and MC21 units? I have one that was labelled as '21, but when I got it out of the shed I noticed that it's a fair bit narrower than the '21's frame rails.

That's why I never got back to you about it.

**Wed Nov 30, 2011 11:17 am » Post: #6 » Download Post**

'18 and '21 HRC air boxes are different. The '21 air box fits quite tight against the frame. It's also got a very high back with 2 holes cut into it.

A '21 also has two cut outs on either side of the box on the top edges where the F3 carb stays can be fitted.

The picture in the first post is a MC21 unit.
_________________
If I have to take the carbs off once more...

**Thu Dec 01, 2011 6:22 pm » Post: #7 » Download Post**

Greggo, I think I have one of these in the shed if you want it? if you are interested I will dig it out at the weekend

**Thu Dec 01, 2011 8:36 pm » Post: #8 » Download Post**

Middo wrote:
Is there any difference between MC18 and MC21 units? I have one that was labelled as '21, but when I got it out of the shed I noticed that it's a fair bit narrower than the '21's frame rails.

If the MC18 airbox needs a new home, let me know please! I may be interested in it! Smile

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Dec 02, 2011 1:29 am » Post: #9 » Download Post**

Yeah, if Andy doesn't need it I do Smile

**Fri Dec 02, 2011 12:42 pm » Post: #10 » Download Post**

OK guys, I'll get it out and take some pics and measurements this weekend.

**Fri Dec 02, 2011 7:56 pm » Post: #11 » Download Post**

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Dec 02, 2011 7:59 pm » Post: #12 » Download Post**

Which brings me back to I want to see a picture of your head Andy!
_________________
If I have to take the carbs off once more...

**Fri Dec 02, 2011 8:27 pm » Post: #13 » Download Post**

Yeah, i'd like that measured up as well !!!
_________________
Proud Father of , 05 ktm 400exc supermoto 2018 honda crf rx supermoto

**Fri Dec 02, 2011 8:30 pm » Post: #14 » Download Post**

Lesviffer750 wrote:
Yeah, i'd like that measured up as well !!!

My head?

_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Fri Dec 02, 2011 11:56 pm » Post: #15 » Download Post**

Don't worry, I'll keep my pants on..........