Power Valve bushing, where to get ?

**Thu Mar 01, 2012 3:03 pm » Post: #1 » Download Post**

Where can you buy the cylinder bushing for the RC valve ?
_________________
Poul
"If Life Gets Boring, Risk It!"
MC21SE, KISS box
MC21SP, HRC box, racing loom

**Thu Mar 01, 2012 4:11 pm » Post: #2 » Download Post**

I couldn't find a part number for the bushes.
Why do you think that you need them if you don't mind me asking?

Mike
_________________
I don't mind dying...I just don't want to be there when it happens!

**Thu Mar 01, 2012 5:11 pm » Post: #3 » Download Post**

You will need to either have some new bushes turned up, or pull some out of some unreclaimable barrels.

Im sure there are a few on here who've comprehensively destroyed barrels... enough for them not to be suitable for repair.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

**Thu Mar 01, 2012 8:44 pm » Post: #4 » Download Post**

Andy wrote:..........................
Im sure there are a few on here who've comprehensively destroyed barrels... enough for them not to be suitable for repair.

........Why do you think that you need them if you don't mind me asking?

I haven't checked all my cylinders but one of my RC valve axles only had a lump of silicone on the end. At that time I couldn't figure out why, but now I know that the bushing is missing totally.

I guess, in other cases, it could also be worn down, so you have to change it.

Does anybody have the dimensions ? Material ?
_________________
Poul
"If Life Gets Boring, Risk It!"
MC21SE, KISS box
MC21SP, HRC box, racing loom