FS: RS250 NX5 '93 updated to '96

**Thu Mar 08, 2012 5:20 pm » Post: #1 » Download Post**

I had this bike for about/maybe five years. "93 updated to '96 sharkskin bodywork. I've only ridden it times. Track days only. Last year I rebuilt the top end with all new parts and replaced the bearings on the bottom end. The rod play was measured to be about half way in the spec range which coincides with what the PO told me. Set up for 200 lb rider but also have springs for lighter rider. Paint s good. Wheels freshly powder coated. New chain,sprockets and tires. Only one track day since complete overhaul last year and that was to break the motor in properly. Spares available include chicken hawk tire warmers, power valve setup tool, good crank. many new sprockets, tons of gaskets (probably enough spares to rebuild the motor again except the pistons). Also have spare heads, clip-ons, brake levers, spare tail, factory rear stand, and a bunch of other stuff I have forgotten about. Bike is fresh and ready to go. Asking $4,000.

_________________
james
Its not how fast you go...Its how you go fast.
MC21 Rothmans
RS250
RC31
CRF250X
748R
Porsche (many)
http://members.rennlist.com/j911brick/rennlist3_002.htm

**Mon Sep 17, 2012 7:47 pm » Post: #2 » Download Post**

Did it sell? Very cheap for an RS!
_________________
More **** two strokes than you can shake a **** stick at.

**Mon Sep 17, 2012 8:07 pm » Post: #3 » Download Post**

Tom got it I think.
_________________
If I have to take the carbs off once more...

**Mon Sep 17, 2012 9:05 pm » Post: #4 » Download Post**

Ahhh..

Still a good price that, even with shipping at a guess!
_________________
More **** two strokes than you can shake a **** stick at.