Hey all,

Very new to this NSR stuff, but have had a few bikes in my time, I've been lead to believe NSR's are somewhat rare here in Australia and trying to track down one at a good price is getting harder, I had only just found this forum due to the original owner of my NSR, he's an awesome guy and we both wanted the same thing for the bike.

Anyway enough about that, here it is!!!

.
.
.

Haha okay turns out I can't add pictures from my tablet so I'll have to get of the toilet and do it.

Righto so as promised here is how she sits at the moment.

Plans are to rebuild into a nice clean weekend bike, maybe the track once in a while too?
i want to go back to the original fairing (which come with the bike) the fairings on it now will be kept/stored/whatever

anyway i need a loom and a PGMIII and it should run.

Welcome to NSR-WORLD, Bento.

Good luck with your project!

Looks like you have MC28 forks there, so do yourself a favour get rid of those awful adaptor brackets and get yourself some nice 2000+ SP1/2 or Fireblade calipers for a start!
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Andy wrote:Welcome to NSR-WORLD, Bento.

Good luck with your project!

Looks like you have MC28 forks there, so do yourself a favour get rid of those awful adaptor brackets and get yourself some nice 2000+ SP1/2 or Fireblade calipers for a start!

Yeah not a fan of the adaptor plates, hmm didnt realise they were MC28 forks... i may be in a spot of bother then, i ordered all the rebuild stuff for an MC21

Hard to tell from the photo, but it looks like they are MC21 calipers! Really, some people shouldn't be allowed near tools!

For all that effort, I don't know why they didn't just get some MC28 (or similar) calipers that would've bolted straight on.
_________________
Andy.
NSR-WORLD.COM

Please keep all responses to Forum posts on the Forum so that others may benefit.

Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.

Check us out on Facebook! Please "like" our page!

Okay so my calipers are off getting rebuilt, well cleaned anyway, i will propably sell them with all the stuff to be assembled and buy MC28 Brembos in that case, my loom arrived from japan last week and is in AMAZING condition!! wire splice already done.

Frame is off to be Aqua blasted
Wheels are off at the powdercoaters getting coated magnesium gold
Engine is at work pulled down with all seals to go in and all the casing off to the Aqua blaster

all should be back very very soon and will be reassembled with all new bolts, bushes and rubbers.

My fairing kit has seen better days and i would prefer NOT to put cheap chinese knock off on all the work im going through now, so does ANYONE have any leads on where i can get NEW/2nd OEM hand fairing kits

take a look on buyee.jp
Should be faiely cheap shipping to you
Daz
_________________
NSR250 MC18 SP, KR1S, TZR250 3MA, RGV250 VJ22P

Bento wrote:

Andy wrote:Welcome to NSR-WORLD, Bento.

Good luck with your project!

Looks like you have MC28 forks there, so do yourself a favour get rid of those awful adaptor brackets and get yourself some nice 2000+ SP1/2 or Fireblade calipers for a start!

Yeah not a fan of the adaptor plates, hmm didnt realise they were MC28 forks... i may be in a spot of bother then, i ordered all the rebuild stuff for an MC21

Depends what you ordered but most of the consumable parts crossover from '21 to '28 forks 👍

'28 forks are unthreaded, you bolt into the callipers through the fork...'21's are threaded.

Bento wrote:Okay so my calipers are off getting rebuilt, well cleaned anyway, i will propably sell them with all the stuff to be assembled and buy MC28 Brembos in that case, my loom arrived from japan last week and is in AMAZING condition!! wire splice already done.

Frame is off to be Aqua blasted
Wheels are off at the powdercoaters getting coated magnesium gold
Engine is at work pulled down with all seals to go in and all the casing off to the Aqua blaster

all should be back very very soon and will be reassembled with all new bolts, bushes and rubbers.

My fairing kit has seen better days and i would prefer NOT to put cheap chinese knock off on all the work im going through now, so does ANYONE have any leads on where i can get NEW/2nd OEM hand fairing kits

Seem to be a few faring kits on Yahoo Japan, but honestly the Chinese replica kits are about 95% perfect, here is a set I fitted for less than £400...

Hi, looks like you have a Tyga rear subframe, you will need a standard one if you want to fit the standard shape seat unit.
_________________
Proud Father of , 05 ktm 400exc supermoto 2018 honda crf rx supermoto