Was hoping someone could give me advice regarding the lock tab washer for the front drive sprocket? Seems like they are discontinued from Honda. Are there any alternatives available?
You're better off asking in Classifieds for a used one. I can do you a new one, but by the time I have paid for Honda shipping and then posted it to you, it's extortionately priced!
I've just completed an order for Honda this morning. If I'd knows I could've tagged it on, but it's too late now I'm afraid. I've already had a shipping confirmation from them. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
No worries. Thanks for the reply Andy. The one I have is still OK but I'm guessing they are only good for one or two uses. Worse comes to worse I guess I can just loctite the bolts and wire them together.
Lockwiring them certainly won't hurt, but the locking plate should last for more than one or two uses if not butchered. You don't need to use both tabs on each bolt either, which effectively doubles their life-span.
At the end of the day though, there's nothing to stop you from making your own locking plates. There's nothing special about them! _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum