The reason I was asking is that I pulled the exhaust off the bike and had a look up the ports. There is some small vertical marks on the piston and bore of the barrel (I'm assuming rings need replacing at the very minimum). The marks don't look major but I wasn't sure at what point a barrel may need to be re-coated - it's expensive and of questionable quality here in Aus. Can anyone give me any pointers or direct me to a post on barrel and piston diagnosis?
I'm having fun with this bike but, as someone else recently posted, it's a somewhat frustrating and expensive process getting it to the point where I will be happy with it's running condition.
I'd have to agree with your thoughts at the end of your last post. After owning mainly ZXR400's which run like clockwork, owning an NSR in terms of maintenance is like owning a steam train.
Best thing to do, by far, is pull the barrels off, and post photos of them and the pistons.
Leave the heads on, and all it will just cost you base gaskets and some gudgeon (wrist) pin circlips, although you should budget at the very least for a set of rings. _________________ Andy.
NSR-WORLD.COM
Please keep all responses to Forum posts on the Forum so that others may benefit.
Please DO NOT PM me for technical advice. My time is precious, and you will probably receive a faster response on the Forum anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum